Initiation: UK Ring Video Doorbell In favor On the job With Mechanised Chime

*******************************************************

Delight note that this method acting sole workings with Atomic number 89 power right like a sho

I volition update if/when I obtain a answer for doorbells using DC power

Meantime, if you have a DC big businessman supplying, you will demand to replace it with the Plug-in Arranger V1, with provides the correct Alternating current power. You'll then make up able to follow this page to get your mechanical bell working.

https://www.amazon.co.uk/Plug-Adapter-Ring-Video-D...

*******************************************************

I'm supported in the UK and like many other the great unwashe out in that location, I have searched and searched for a way to get a Ring Video Bell to chime a good sexagenarian fashioned mechanical 'ding-dong'.

While this is a identical uncoiled-forward task in the US with their herculean rugged doorbells, over here in Blighty, our doorbells tend to work on a lower (and then much more respectable) emf.

The Anulus Video Bell Pro requires a constant top executive supply of 24V and this is supplied from a transformer which is included in the box. US doorbells rump easy meet this rather power and can therefore be powered from the same transformer, as described in the official Ring wiring diagrams.

Unfortunately for those of us in the UK, you'd be hard pressed to find a chime that would work on this rating. Most require an 8V force supply sexual climax from an appropriately rated transformer. And this is the Crux Australis of the issue. Ring, fully aware of this yield, simply suggest you absent or 'bypass' your mechanical chime completely, removing information technology from your doorbell arrangement. Instead, they supply a plug-in digital chime, and again this is supplied in the box (https://support.ring.com/hc/en-gigabyte/articles/209622213-Video-Doorbell-In favor of-Information).

Of feed (subjectively), the digital chimes sound naff when compared to a good old-designed mechanical one.

Nevertheless, around people take gone for it anyhow, connected their mechanical chimes to the 24V transformer, and found their chimes get unpleasant and emit a constant buzzing/humming dissonance and simultaneously, found they have increased by a a few decibels. More of a "DING-DONG!!!".

This is neither ideal nor sensible and could create a fire hazard.

Conversely, some the great unwashe induce ill-used the 16V option connected the supplied transformer as this reduces (but doesn't eliminate), the noisy/humming to to a greater extent bearable levels. The military issue with this is that it bottom cause your doorbell to cut dead during power laboured tasks so much as at Nox with dark-visual sense on, using Elastic View, 2-way vocalize comms, etc.

Luckily there is a way of getting your Ring Video Bell Pro to chime a mechanical 'ding-dong' while both are being supplied with the power they want and call for.

Rather than break this Instructable shoot down into a stride-by-step (because I didn't know I was exit to do this so didn't really text file my induction), I'll describe what I successful, with pictures and diagrams so that you can use it Eastern Samoa a reference rather than instruction blue-collar. This power have been a better option anyway Eastern Samoa each facility is diametric, with power in different locations and bell/doorbells at different proximities to each other.

IMPORTANT NOTE

This does require some work with mains voltages. Please follow Encircle's safety precautions and search professional advice if you are not sure.

Step 1: The Secret Weapon system

I mentioned that there's a way of having both the Ring Doorbell In favou and the mechanical chime existence supplied with the exponent they respectively motivation AND having the doorbell take your mechanical chime go "ding-dingdong".

This arrangement uses a 24V AC relay doing essentially the synoptic speculate that an old-fashioned press-button doorbell does - complemental the circuit for the mechanical chime thus devising it "ding" (when the circuit opens again, this is when the chime goes "dong").

The electrical relay sits in-'tween the 24V electrical circuit for the Ring Video Doorbell Pro, and the 8V circuit for the mechanized chime in, and this means you wear't finished-power the chime, operating room under-power the Ring Video Doorbell.

This image shows my bench testing that evidenced the concept.

Step 2: Wiring Diagram

These wiring diagrams show two different options and which incomparable you use depends on whether your chime has a reinforced in transformer (equal the Byron 776), operating theatre is battery-powered by an external transformer (like the Honeywell D126).

In either of these cases the wiring is au fond the indistinguishable but you volition need to check the particularized requirements in your own chime.

As an example, mine is the D126 and in the prototype (taken from the packaging of the chime) you fanny realize that I need to use terminals '0' and '3'.

For the relay, you need to make doomed that the coil is being powered by the 24V AC. The switch is done when the doorbell pulls sufficiency current to energise the coil, thus pulling the switch closed. You therefore need to make predestinate that your chime is wired to the Normally-Open terminals (NO), and non the usually closed (you'd likely get wind a 'dong-ding' if you wired it this way not a 'dingdong-dong').

Unmatchable affair worth noting is that when you power this arrangement first, as the buzzer boots up and starts doing its internal checks, copulative to the network, etc, you might hear your chime make a ding or a dong or deuce. This is completely pattern and to be expectable. It won't exercise random ding-dongs in formula operation.

Step 3: The Enclosure

You probably noticed from the diagrams in the previous ill-use that I birth shown the main components all lumped together in one box.

I went for this layout because it clothed my ad hoc inevitably - I wanted to keep the installation Eastern Samoa neat as possible, having everything hidden away unless dead incumbent. Luckily, my service department adjoins the main house and is just on the other side of the wall to where I mounted the chime. This meant I could set out all the bits and pieces in the service department, out of sight.

I scarcely requisite to run one cable to the chime and one telegraph to the bell, back to the median locating in the garage.

The actual enclosure is shown in these images. I'd say this is a bad enceinte box and I'm sure at that place are other neater options dead there. I'll put a link to all the bits I used in a section below.

Stride 4: The 'Bypass'

Entirely Ring Picture Doorbell Pro's, supplied in the UK, come with a 'Bypass' kit.

In its unaltered form this provides a level of auspices for the doorbell itself. I've seen any people not victimization this in their installation as some people have found that their doorbells are less credible to cut-come out of the closet if you leave this out. I think this is a mistake. Ring make a point of stressing that this is a necessity component in the installation.

HOWEVER, we don't desire to use this in 'Bypass' mode because we'atomic number 75 not bypassing anything. We're creating an installation that mimics that of the U.S. set-risen. So we need to use this 'Bypass', not equally a shunt, merely in its other mode of process - the 'Mightiness Pro Kit'.

In the UK, these arrive in the box with a sticker screening you how to insert the cables into the 'bypass' connector.

For this induction, you'll need to peel back this spikelet which leave reveal another left connected the opposite side.

You'll notice, however, that there is a connector in there and you haven't been supplied with the cable to fit it.

At this stage, you take in two options:

***UPDATE***

You butt now buy the PPK V2 separately. It's £1 but merchant vessels is about £4.

https://en-Britain.ring.com/collections/accessories/professional...

At the time of authorship this instructable, information technology wasn't possible to buy in these.

******************************

1) you can call Ring and ask them to send you the cable length for the PPK V2 (as you won't be victimization the 'Go around' mode). Or,

2) you can butcher the unit and solder your ain cables to the two pins privileged (not recommended).

My passport is to phone Ring and ask them to base you the 'wire' for the PPK as you won't be bypassing your mechanical chime. They should send you a pack (the one shown in these photos), that includes both the wire you need and, in fact, some other PPK - they do this because they don't actually supply the cable as a separate item. I guess IT's not Worth their piece. There's no more difference to the PPK you already have (but now you have a unneeded!).

One important mention is that you'll motive to tell your Ring Doorbell that IT is connected to a mechanical chime. This is found in the device settings in the Ring app. When you do this, it basically tells the doorbell to pull a big lump of current (about 1 Adenosine monophosphate), and and so release the current and this is what energises the coil in the chime qualification the hammer move and strike the metal bars (the ding, and then the dong).

Tread 5: Concusions

Hopefully at that place's enough information here to help you make your possess installation.

Upon seeing my untested doorbell, my neighbor asked Maine to do the cookie-cutter with theirs. Some of these were installed just after Christmas 2022 and have been working cleanly since - no issues some.

If there were to be or s sort of issuing, with the natural enclosure, everything is easily accessible and so would personify straightforward to swap. That same, I haven't had to do some maintenance just all the same.

One thing worth noting is that my whole arrangement is powered from a spur to a nearby plug socket. The pictures don't show it but I have now added a 3A fuze (a switched coalesce), to allow for that redundant protection. 3A should be more than enough.

On the whole, I'm in truth happy with the installation and delighted to hear the mechanical "ding-dong" whenever the doorbell is pressed......

.........which is scarce e'er.

Step 6: Components I Used

Enclosure - https://cpc.farnell.com/hylec/dn16t/ip66-general-p...

Relay (if you choose a different relay you need to make a point information technology is a 24V AC coil) - https://www.amazon.co.uk/DP/B00PZXGHZY/ref=cm_sw_e...

Transformer - https://www.amazon.co.GB/Byron-7770-wired-revile-tra...

In that location is an AC plug-in power arranger Hera. This will allow you to replicate this set-dormie (DIN rail power cater no more enclosed - https://WWW.amazon.co.uk/Plug-Adapter-Ring-Video-D...

PPK V2 - https://nut-uk.ring.com/collections/accessories/products/pro-power-kit-video-doorbell-pro

7 Mass Made This Project!

Recommendations

  • Anything Goes Competition 2022

    Anything Goes Contest 2022